Skip to main content

High pressure washer achieves two modes of ultra high pressure

In the field of industrial cleaning, the application range of high-pressure cleaners has been quite extensive, but the proportion of equipment in this area is not high, mainly due to the limitations of factors such as process and technology, which makes the pressure of domestic overpressure washing machines. Can only reach 1500-2000bar or so. In order to change this phenomenon, we can further expand the application of domestic ultra-high pressure cleaners by supercharging, so what kind of way should we achieve supercharging? There are two types of pressurization methods for high-pressure cleaners: one is a high pressure washer and the other is a supercharger, both of which have their own characteristics.

When the high-pressure cleaner is used to increase the pressure by the high-pressure plunger pump, the high-pressure plunger pump itself has the characteristics of compact structure, small volume, few pipes, and beautiful appearance, so the complexity of the structure of the high-pressure cleaner is not increased. It is also relatively easy to achieve high-volume automated production and assembly, but it requires a higher sealing material. If the supercharger in the high pressure cleaner is used as an environmental booster, it is easy to reach an ultra-high pressure of 3000 bar; if the sealing method is slightly improved, the high-pressure cleaner can even reach a pressure of 5000 bar.

Moreover, since the speed of the supercharger plunger itself is relatively low, it is generally only 0.2 m/s, and the requirements for the seal are not high, so the requirement for the inlet water pressure is low. The water can be cut off without the need of a water tank, which avoids the water overflowing the water tank during use. In addition, each group of superchargers is independent, so when a group of superchargers in a high pressure cleaner fails, the other superchargers automatically speed up the movement and provide greater flow. The only downside is that the supercharger has a small flow rate and must be equipped with a hydraulic system, which makes it difficult to automate production and assembly.
Labels:

Comments

Post a Comment

Popular posts from this blog

What is the difference between the pressure of the high pressure cleaner

The higher the pressure of the high-pressure cleaner, the higher the performance of the component and the tightness of the device, and the corresponding increase is required. As a result, the cost is increased. Once the pressure is too high, when the jet is sprayed onto the surface of the cleaning object, it is likely to cause splashing of water, which will cause adverse effects on the cleaning work. As a result, the water pressure will be offset and the water will be atomized. As a result, the cleaning efficiency is not only reduced, but also the cleaning effect is not ideal. The pressure required for high-pressure cleaning should be comprehensively considered according to the specific requirements of the work and the nature of the dirt on the surface of the cleaning object and the degree of cleaning. The required pressure is scientific and reasonable. Nowadays, when the  high pressure washer machine motor  is cleaned, the required pressure is determined by the experimenta...
Post a Comment
Read more

Common hot water pressure washer

Ultra-high pressure cleaners are generally divided into two types, which are divided into hot water and cold water, but the pressure of hot water high-pressure cleaners we commonly use is generally not higher than 250bar. Hot-water high-pressure cleaners are mainly used to clean difficult to wash The dirt and hot water pressure washer are heated by the expansion tube. When the water passes through the expansion tube, the pressure of the expansion tube will be relatively large. If the bearing capacity of the expansion tube does not increase, the pressure of the hot water pressure washer It will not increase. However, if the pressure of the expanded pipe is increased, the cost will also increase. Therefore, the working pressure of hot water pressure washer will be about 200 BAR. When high pressure is used, high pressure cold water washer is usually used to achieve the cleaning effect. When cleaning oil and various stubborn stains, Use hot  pressure sprayer  or saturated steam wa...
Post a Comment
Read more

What are the main structures of electric sprayers

Electric sprayers are often used in agricultural farming and in greenhouses. This electric sprayer directly replaces manual ones, which saves a lot of manpower. For larger areas, electric sprayers can Spraying quickly. At the end of a control cycle or when it is used again every few days, the dry battery should be taken out to prevent the battery from rusting. The impeller is one of the most critical parts in the  electric pressure washer , which directly affects the spray quality. The impeller consists of a front impeller and a rear impeller. The front and rear impellers are connected by eight fixing pins. On the rear impeller, each pin hole has a 1.5 mm thick shoulder on both sides to ensure a certain distance between the front and rear impellers. After the front and rear impellers are installed, press one end of the micro motor shaft so that the impeller rotates. The front and rear impellers are disc-shaped, mainly to prevent the drops of the drug adhering to the surface of ...
Post a Comment
Read more