Skip to main content

Diesel driven ultra high pressure cleaner


Industrial ultra-high pressure cleaners and cleaning pumps have been widely used in various fields of industry. It is a device that causes high-pressure piston pumps to generate high-pressure water to remove dirt and achieve object cleaning. It is currently recognized as a scientific, economic and environmentally friendly cleaning method in the world. Its application range is very wide. The specific applications include cleaning and cleaning of oil, rust and dirt of various mechanical equipment, refurbishment of equipment, dirt on the exterior walls of buildings, dirt on the road surface, paints, etc. Cleaning of the corners to be cleaned; cleaning of the community, property pipelines, pressure testing of oil fields and natural gas pipelines; ultra-high pressure cleaners and cleaning pumps of more than 500 bar for concrete chiseling, plucking, and even cutting. In short, only you need to achieve the cleaning and cleaning effect is basically impossible without the high pressure cleaner and the cleaning pump.

Industrial ultra-high pressure cleaners and cleaning pumps can be divided into motor-driven high-pressure cleaners, gasoline-powered high-pressure cleaners, and diesel-driven high-pressure cleaners. Most of the industrial ultra-high pressure cleaning pumps we use are driven by 380V motors. This ultra-high pressure cleaning machine is suitable for use in factories with convenient power supply. If it is used in the field or when power is limited, it is better to use diesel-driven cleaning pumps. Convenience.

The main working principle of the diesel-driven high-pressure cleaner is that the engine drives the booster pump to pass the pumped water through the filter into the high-pressure pump. Under the control of the high-pressure water, the gas enters the high-pressure pump from the intake pump, and the high-pressure pump mixes the water and gas to increase The pressure enters the spray gun through a high pressure hose and then forms a high pressure water jet through the nozzle.

When the diesel-driven high-pressure cleaner is working at full load, the diesel throttle will be pulled to the maximum position. When the high-pressure cleaning pump is in standby, the throttle will return to the minimum position.

Labels:

Comments

Post a Comment

Popular posts from this blog

What is the difference between the pressure of the high pressure cleaner

The higher the pressure of the high-pressure cleaner, the higher the performance of the component and the tightness of the device, and the corresponding increase is required. As a result, the cost is increased. Once the pressure is too high, when the jet is sprayed onto the surface of the cleaning object, it is likely to cause splashing of water, which will cause adverse effects on the cleaning work. As a result, the water pressure will be offset and the water will be atomized. As a result, the cleaning efficiency is not only reduced, but also the cleaning effect is not ideal. The pressure required for high-pressure cleaning should be comprehensively considered according to the specific requirements of the work and the nature of the dirt on the surface of the cleaning object and the degree of cleaning. The required pressure is scientific and reasonable. Nowadays, when the  high pressure washer machine motor  is cleaned, the required pressure is determined by the experimenta...
Post a Comment
Read more

Common hot water pressure washer

Ultra-high pressure cleaners are generally divided into two types, which are divided into hot water and cold water, but the pressure of hot water high-pressure cleaners we commonly use is generally not higher than 250bar. Hot-water high-pressure cleaners are mainly used to clean difficult to wash The dirt and hot water pressure washer are heated by the expansion tube. When the water passes through the expansion tube, the pressure of the expansion tube will be relatively large. If the bearing capacity of the expansion tube does not increase, the pressure of the hot water pressure washer It will not increase. However, if the pressure of the expanded pipe is increased, the cost will also increase. Therefore, the working pressure of hot water pressure washer will be about 200 BAR. When high pressure is used, high pressure cold water washer is usually used to achieve the cleaning effect. When cleaning oil and various stubborn stains, Use hot  pressure sprayer  or saturated steam wa...
Post a Comment
Read more

What are the main structures of electric sprayers

Electric sprayers are often used in agricultural farming and in greenhouses. This electric sprayer directly replaces manual ones, which saves a lot of manpower. For larger areas, electric sprayers can Spraying quickly. At the end of a control cycle or when it is used again every few days, the dry battery should be taken out to prevent the battery from rusting. The impeller is one of the most critical parts in the  electric pressure washer , which directly affects the spray quality. The impeller consists of a front impeller and a rear impeller. The front and rear impellers are connected by eight fixing pins. On the rear impeller, each pin hole has a 1.5 mm thick shoulder on both sides to ensure a certain distance between the front and rear impellers. After the front and rear impellers are installed, press one end of the micro motor shaft so that the impeller rotates. The front and rear impellers are disc-shaped, mainly to prevent the drops of the drug adhering to the surface of ...
Post a Comment
Read more