Hangyu high pressure washer

The higher the pressure of the high-pressure cleaner, the higher the performance of the component and the tightness of the device, and the corresponding increase is required. As a result, the cost is increased. Once the pressure is too high, when the jet is sprayed onto the surface of the cleaning object, it is likely to cause splashing of water, which will cause adverse effects on the cleaning work. As a result, the water pressure will be offset and the water will be atomized. As a result, the cleaning efficiency is not only reduced, but also the cleaning effect is not ideal. The pressure required for high-pressure cleaning should be comprehensively considered according to the specific requirements of the work and the nature of the dirt on the surface of the cleaning object and the degree of cleaning. The required pressure is scientific and reasonable. Nowadays, when the  high pressure washer machine motor  is cleaned, the required pressure is determined by the experimenta...

Electric sprayers are often used in agricultural farming and in greenhouses. This electric sprayer directly replaces manual ones, which saves a lot of manpower. For larger areas, electric sprayers can Spraying quickly. At the end of a control cycle or when it is used again every few days, the dry battery should be taken out to prevent the battery from rusting. The impeller is one of the most critical parts in the  electric pressure washer , which directly affects the spray quality. The impeller consists of a front impeller and a rear impeller. The front and rear impellers are connected by eight fixing pins. On the rear impeller, each pin hole has a 1.5 mm thick shoulder on both sides to ensure a certain distance between the front and rear impellers. After the front and rear impellers are installed, press one end of the micro motor shaft so that the impeller rotates. The front and rear impellers are disc-shaped, mainly to prevent the drops of the drug adhering to the surface of ...